The owner of this guestbook has (temporarily) disabled adding new messages.
-
12:50am 07-12-2011Feliks
-
And here's the picture of Homer family watching the Red Baron Windmill prototype with flat Venturi nozzles.
If you meet all expectations, this is a prototype of Homer performs with Stone, as Pharaoh himself had wished.
And it will be a very durable building, well, for example, compared to the ridiculously short life of nuclear reactors...
Best Regards Andrew
-
12:09pm 07-07-2011Feliks
-
Well, some developing:
Of course, you must use the entire art of loving wing aerodynamics.
And How companies grow one way: speed amplifier in the form of air intake venturi nozzle.
Well, and a new kind of wings...
Venturi nozzle flat... After all the two wings made contrary to each other..
Regards Andrew
My other e mail: [email protected]
-
12:55pm 07-03-2011Feliks
-
The Red Baron Windmill:
Due to the vacuum created by the wing, over which the wind flows, wind turbines in the channels of collective spin vacuum and provide energy....
Here you can see demonstrations of the film that created a vacuum at the top of the wing when the wind blows on him.
The resulting vacuum can suck the ball into the pipe passing through the wing.
By placing many of the holes on the top of the wing, use the vacuum on the entire surface of the wing. The Assembly shall meet in two sustaining supports and drives the suction fans to them with normal air pressure.
This will of course be used to produce energy,
and its amount will depend on the size of the system...
Regards Andrew
-
10:53pm 06-22-2011Feliks
-
Another animation:
http://www.youtube.com/watch?v=Tz2rQvCxp44
Regards Andrew
-
10:27pm 06-16-2011Connecticut Power
- Connecticut Power will lower your current CL&P or UI Electric Bill CT Power saves money on the cost of energy.
-
1:15pm 06-02-2011Feliks
-
Quote:
Originally posted by Feliks
On the pictures below you can see how small the venturi nozzle is to drive the gyroscopes in the strands. My finger and applied on the next hand, illustrate the size of the venturi tube. It is almost equal to the diameter of my finger. Now, please imagine how much energy to give the fan with the same diameter of my finger...
A venturi tube so small as my finger is able to propel a large heavy rotating disk gyroscope air to 10 000 RPM, and even walk through the air filter....
http://www.freepatentsonline.com/1982636.pdf
http://www.pilotfriend.com/training/flight_training/fxd_wing/gyro.htm
Andrew
-
1:11pm 06-02-2011Feliks
-
Lesson Two: in terms of fundamental historical
Venturitubes 1937.pdf
On the pictures below you can see how small the venturi nozzle is to drive the gyroscopes in the strands. My finger and applied on the next hand, illustrate the size of the venturi tube. It is almost equal to the diameter of my finger. Now, please imagine how much energy to give the fan with the same diameter of my finger...
On the pictures below you can see how small the venturi nozzle is to drive the gyroscopes in the strands. My finger and applied on the next hand, illustrate the size of the venturi tube. It is almost equal to the diameter of my finger. Now, please imagine how much energy to give the fan with the same diameter of my finger...
Since the narrowest point of the venturi tube, we can easily get up to 10 times higher air velocity, we can mount the engine behind the jet frame, which at high speeds the inlet has a good performance.
For example, you can mount an engine on an Tourist Plane, which reaches 200 km / h at the entrance to the RAM JET would be about 2000 km / h....
This will generate additional good sequence, using a very simple engine ( or two )
Andrew
-
12:15pm 05-25-2011Damian
- IT is very interesting concept. Regards : )
-
10:23am 05-17-2011Feliks
-
You know how it works "Underwater Windmill" ?
"The gain in kinetic energy resulting from the increased linear velocity in the throat is offset (i.e., balanced) by the decrease of pressure in the throat. The reduction in pressure which occurs when the fluid flows through the throat is called the Venturi effect and is named after the Italian physicist Giovanni Battista Venturi (1746 - 1822) who first observed the effect."
http://en.citizendium.org/wiki/Venturi_effect
http://www.hippocampus.org/homework-help/P...Simulation.html
Andrew
-
1:07pm 05-16-2011Ray Galloway
- Nice site,very interesting.
-
1:20pm 05-06-2011Feliks
-
" The Full Underground Windmill "
Regards Andrew
-
1:19pm 05-06-2011Feliks
-
"The Non-Undergroud Windmill"
This is Homer. Now you can safely drink, because he knows the underground fan will give him a lot cheaper green energy.
It can use an underground windmill used an old engine, for example, the Harrier. Or the same fan.
Regards Andrew
-
11:37am 04-25-2011Awesh Kumar
-
Hi Andrew, your work is amazing, the way you made your ideas work, is inexplicable. This presentation is enough to keep we engineers, to remain motivated and persue our dreams till we achieve it.
I am also working on combustion engine and you will remain my ideal from now, for sure.
Will contact you sure if i will need any help in my work.
thanks a lot.
Awesh Kumar
Mechanical Engineer
-
10:43pm 04-22-2011Feliks
-
Holidays are approaching, so we do spring cleaning. For sure we will use the vacuum cleaner. We can using such a vacuum cleaner to see how the underground windmill will run . Namely, you should close the pipe vacum cleaner is best without the caps to a small fan, for example, to cool the CPU, or a computer power supply. We will have a working model of an underground windmill......
The following picture shows the sports exhaust, which are built with a relatively long individual pipes from each cylinder. Their length L is crucial for their proper operation. Mass departing exhaust with a volume of such tubes will help the new portion of air intake into the cylinder, while the common valve opening. This mass is precisely calculated for the speed at which it will perform a so-called dynamic charge of the engine
Just the energy contained in the exhaust of precision of the volume of the exhaust manifold vacuum in the cylinder does.
Happy Easter to everybody !
Andrew
-
10:41pm 04-22-2011Feliks
-
In other forums:
quote name='gruntguru' post='4982321' date='Apr 20 2011, 01:11']Total power in the wind. [center]Power = 0.5 x Swept Area x Air Density x Velocity3[/center]from http://www.reuk.co.uk/Calculation-of-Wind-Power.htm .../quote
http://www.reuk.co.uk/Calculation-of-Wind-Power.htm
In the Wikipedia is a big mistake or inaccuracy
Call it what you think.
Now why is that:
Kinetic Energy = Mass x 0.5 x Velocity2 It is certainly true.
But when it comes to the calculated mass is no longer referred to as:
Mass / sec (kg / s) = Velocity ( m / sec ) x Area ( m2 ) x Density (kg/m3 )
In my opinion, if we count the mass, we must indicate the volume of the cylinder, which is in addition to its surface and its length.
Here, due to an error or a" shortcut calculations" assume that the length of the cylinder is equal to 1.
But it is not always true mass depends also on the length of the cylinder, because they can be 50 meters.
Of course, if you will take part in the formation of energy.
Even in a new traditional windmill blade width can have two meter, and now the model is invalid.
* But because the masses are Surface x L x Density. Always.
Well, where we have L ?
By the way. What has to calculate the speed of her weight?